兰州Shell Aeroshell Oil W100-飞机活塞发动机润滑油-壳牌W100航空润滑油AeroShell OilsW80, W100 andW120 are ashless dispersant oils, specifically developed foraviation piston engines, The W range of AeroShellaircraft oils were the first to use ashless dispersant technology,keeping your engine cleaner. The package of additives withinAeroShell Oils W80, W100, and W120 are combined with selectedhigh-viscosity index base stocks to offer exceptional stability,dispersion, and anti-forming performance within the aircraft pistonengines for which they’re approved.
Learn about AeroShell Oils W80, W100, and W120, including theirproduct benefits, specifications and approvals, some of theirtypical properties, health and safety information, and more.
Whether you fly for pleasure or your business depends on flight,AeroShell products are designed to help lift your performance.
How to use AeroShell Oils W80, W100, and W120
序号(No.)品 名(Name)标 准(Specification)包 装(Package)
1 Aeroshell Turbine Oil 3壳牌3号涡轮机油（透平油）20L/PAIL
2 Aeroshell Turbine Oil 308壳牌308号涡轮机油（透平油）24X1QT/CTN
3 Aeroshell Turbine Oil 390壳牌390号涡轮机油（透平油）12X1L/CTN
4 Aeroshell Turbine Oil 500壳牌500号涡轮机油（透平油）24X1QT/CTN
5 Aeroshell Turbine Oil 555壳牌555号涡轮机油（透平油）24X1QT/CTN
6 Aeroshell Turbine Oil 560壳牌560号涡轮机油（透平油）MIL-PRF-23699F GRADE HTS24X1QT/CTN
7 Aeroshell Oil 100壳牌100号四冲程内燃机油12X1QT/CTN
8 Aeroshell Oil Diesel 10W40壳牌10w40号四冲程柴油内燃机油12X1QT/CTN
9 Aeroshell Oil 65壳牌65号四冲程内燃机油12X1QT/CTN
10 Aeroshell Oil 80壳牌80号四冲程内燃机油12X1QT/CTN
11 Aeroshell Oil W 15W-50壳牌W 15W-50号四冲程内燃机油12X1QT/CTN
12 Aeroshell Oil W 15W-50壳牌W 15W-50号四冲程内燃机油20L/PAIL
13 Aeroshell Oil W100壳牌W100号四冲程内燃机油J-1899,SAE,Grade50,AIR3570MIL-L-22851D 12X1QT/CTN
14 Aeroshell Oil W100壳牌W100号四冲程内燃机油J-1899,SAE-Grade50,AIR3570,MIL-L-22851D 20L/PAIL
15 Aeroshell Oil W100壳牌W100号四冲程内燃机油J-1899,SAE-Grade50,AIR3570,MIL-L-22851D 205L/PAIL
16 Aeroshell Oil W120壳牌W120号四冲程内燃机油20L/PAIL
17 Aeroshell Oil W65壳牌W65号四冲程内燃机油12X1QT/CTN
18 Aeroshell Grease 14壳牌14号航空润滑脂MIL-G-25537C 35LB/PAIL
19 Aeroshell Grease 14壳牌14号航空润滑脂MIL-G-25537C 4X3KG/CTN
20 Aeroshell Grease 15壳牌15号航空润滑脂15.875KG/PAIL
21 Aeroshell Grease 22壳牌22号航空润滑脂MIL-PRF-81322F Gr2 DOD-G-24508A17KG/PAIL
22 Aeroshell Grease 22壳牌22号航空润滑脂MIL-PRF-81322F Gr2 DOD-G-24508A4X3KG/CTN
23 Aeroshell Grease 33壳牌33号航空润滑脂MIL-PRF-23827C TY1 BMS3-33A17KG/PAIL
24 Aeroshell Grease 33壳牌33号航空润滑脂MIL-PRF-23827C TY1 BMS3-33A30X0.4KG/CTN
25 Aeroshell Grease 33壳牌33号航空润滑脂MIL-PRF-23827C TY1 BMS3-33A4X3KG/CTN
AeroShell W Oils can be used in four-stroke (four-cycle) certifiedreciprocating piston engines, including fuel-injected andturbocharged engines. Radial engine operators tend to use AeroShellOil W120 in warm weather, while AeroShell Oil W100 and AeroShellOil W 15W-50 should be used in cooler temperatures.
For Lycoming and Continental flat engines, AeroShell Oil W100 orAeroShell Oil W 15W-50 are the most common choices. But AeroShellOil W80 works brilliantly in place of AeroShell Oil W100 during thecolder months.
Check with your engine manufacturer or rebuilder to find out ifAeroShell Oils W80, W100, or W120 can be used during break-in.While many engine manufacturers and rebuilders and overhaulagencies say to use straight mineral oils, some say that eitherashless dispersant or straight mineral oil can be used for break-in– for example, for Lycoming O-320H and O/LO360E. For allturbocharged Lycoming engines, ashless dispersant oils arerecommended for break-in.
AeroShell W Oils shouldn’t be used in automotive engines. If you’reusing an automotive engine that’s been converted for use in anaircraft, check with the engine manufacturer to find out which oilyou should use.
Single Grade Ashless Dispersant Oils
AeroShell Oils W80, W100, and W120 are ashless dispersant oilsspecifically developed for aviation piston engines. They reap theperformance benefits of combining non-metallic additives withselected high viscosity index base oils. No general rule exists forevery engine type when choosing the correct grade of oil; however,based on the average ambient outside temperature at enginestart-up, the most common grades are SAE 40, SAE 50, and SAE 60,which equate to AeroShell Oil W80, W100, and W120 respectively.
Traditionally, the choice is associated with climatic zones:AeroShell W80 for cold climate regions (-17 to 21°C), AeroShell OilW100 for temperate regions (16 to 32°C), and AeroShell Oil W120 forwarmer climates (above 26°C)
AeroShell Oils W80, W100, and W120 are produced to meet fully theSAE specification J1899 (Grades SAE 40, 50, and 60respectively).
AeroShell W80, W100, and W120 product benefits
Promotes engine cleanliness. The non-ash forming, polymericadditive was developed to help eliminate the harmful combustionchamber deposits that occur during normal operation.
High viscosity index base oils used in AeroShell W oils maintaintheir viscosity and help protect engine components more effectivelyunder the high shear stresses that an engine places onlubricants.
Provides compatibility with other approved aircraft pistonengine oils. Since AeroShell Oils W80, W100, and W120 are fullyapproved to SAE J1899 and are listed on the relevant QualifiedProducts List (QPL), elaborate precautions are not needed whenchanging from similarly approved aircraft engine oils, as long asthese oils are qualified products.
AeroShell W Oils are inherently stable in storage. Providingthey have been stored and handled correctly, prolonged storage doesnot have any effect on their quality, properties, orperformance.
AeroShell W80, W100, and W120 specifications and approvals
US, UK – J1899 SAE grade 40 (AeroShell Oil W80), J1899 SAE grade50 (AeroShell Oil W100), and J1899 SAE grade 60 (AeroShell OilW120).
Russian – MS-14 (AeroShell Oil W80), MS-20 (AeroShell OilW100).
Joint Service Designation – OMD-160 (AeroShell Oil W80), OMD-250(AeroShell Oil W100), OMD-370 (AeroShell Oil W120).
The following engine manufacturers have approved AeroShell OilsW80, W100, and W120 for use:
Textron Lycoming – 301F.
Teledyne Continental – MHS 24B.
Pratt & Whitney – Service Bulletin 1183-S.
Curtiss Wright – Various Service Bulletins.
Franklin Engines – Various Service Bulletins.
Typical properties of AeroShell Oils W80, W100, and W120
These oils displayed the right kinds of properties to gain theseapprovals, which can be found in the AeroShell Book. Below are someof the properties that AeroShell Oils W80, W100, and W120demonstrate:
SAE viscosity grade – 40 (AeroShell Oil W80), 50 (AeroShell OilW100), 60 (AeroShell Oil W120).
Viscosity index – 102 (AeroShell Oils W80), Greater than 96(AeroShell Oil W100 and W120).
Total acidity – Less than 0.5mgKOH/g for all threeAeroShell piston engine oils.
Copper corrosion at 100°C – 1a for all three AeroShell pistonengine oils.
Ash content – 0.004%m for all three AeroShell piston engineoils.
